API16A / 6D Ball Valve / Control Ball Valve / Ball Valve with Actuator

Made in ITALY

Control Valves

All Cage Trims are inserted into the PIBIVIESSE High Performance trunnion mounted ball valves.

CAGEBALLâ„¢ control ball valves are particularly recommended any time that noise reduction, cavitation control, erosion, hydrate formation, plugging and clogging risk are present or handling of very large flow rates is a challenge for conventional valves. Another important feature is the large rangeability. One valve can perform the duty of two or even three conventional control valves. The potential savings of building only one single control loop is huge. These control valves product lines can be further personalized with: Integrated down stream Flow Restrictor, Special silencer or Hyper Silencer trim. The Hyper-Cage trim is also available; this design combines the high efficiency of the multistage type trim with the Cv of a conventional ball valve allowing, if needed the pigging of the pipeline.

Top Entry

Trunnion mounted ball / Triple barrier stem seals / Anti-Blow Out stem design

Top Entry Ball valve is available in several unique design options. 1 piece body with bolted bonnet, flexible design suitable to meet any application and specification requirement.

Main Design Features
• Bolted Bonnet
• Full and Reduced Bore
• Anti-Blow Out stem design
• Long Pattern
• Emergency sealant injection on stem and seats

Side Entry

Trunnion mounted ball / Triple barrier stem seals / Anti-Blow Out stem design

The Side Entry design is the most commonly used Ball valve in the upstream, midstream and downstream sectors of the Oil & Gas Industry. Onshore LNG Plant and Offshore FLNG, Onshore Production, Refining & Petrochemical, Onshore Treatment, Offshore Platforms & FPSO, Power Generation, Hydropower, Desalination (Water Service)

Main Design Features
• Full and Reduced Bore
• Emergency sealant injection on stem and seats
• Long Pattern
• Fire Safe
• Soft, Metal-to-Metal sealing

Fully Welded

Welded construction / Trunnion mounted ball / Triple barrier stem seals

Welded Body Ball valve is available in several design options and materials. 2 or 3 piece body construction, soft or metal seated, bolted or welded body cover, firesafe, flexible design suitable to meet a broad range of application and specification requirement.

Main Design Features
• Full and Reduced Bore
• Anti-static design
• Long Pattern
• Emergency Sealant Injection on Stem & Seats
• Soft, Metal-to-Metal or Primary Metal Secondary Soft (PMSS) sealing